I-INKOMA HSGK High Performance Screw Jacks yakhelwe izinhlelo zokusebenza ezinzima, enikeza ukuqina nokusebenza okukhethekile. Ifakwe uwoyela wokuthambisa kanye nezimpiko zokupholisa, lawa majeke aqinisekisa ukusebenza kahle nangaphansi kwezimo ezimbi kakhulu. Ngokwakhiwa okuqinile kanye nezinto ezikhethwe ngokucophelela, zinikeza ukusebenza kahle okuphezulu nokuphila isikhathi eside.
Izithombe ezinhle kakhulu zomkhiqizo:
- Osayizi: Batholakala ngamamodeli ukusuka ku-HSGK-3 ukuya ku-HSGK-9
- Amandla Wokulayisha: Isekela kokubili imithwalo ecindezelayo neqinile efika ku-1000 kN
- Isivinini Sokufaka: Kufika ku-3000 rpm
- I-Cooling Fins: Ukukhipha ukushisa okuthuthukisiwe ezimweni ezimbi kakhulu
- Materials: Izindlu zensimbi ezimpunga ezisezingeni eliphezulu, ubuso bokulungisa obufakwe ngomshini kahle, inkomba yezinga likawoyela elincishisiwe, nesikulufu sokungenisa umoya.
- Izinhlobo ze-Spindle: Itholakala nge-trapezoidal noma i-ballscrew spindles
- Amagiya: Isondo lezikelemu elishayelwa amagiya aqinile naphansi anejiyomethri ethuthukisiwe
- Ukusekela: Amarola enaliti asekela imithwalo ye-radial ku-spindle ukuze kunyuke impilo nokusebenza
- Izinketho zokuklama:
- Inguqulo ejikelezayo (R): Ihlinzeka ngokuphakamisa okuqondile ngokuzungezisa ukuphotha, nge-spindle egxilile.
- Inguqulo yokuhumusha (S): I-spindle ihamba nge-axially ukuze iphakamise umthwalo, ngomkhawulo wokuhamba kanye nokuvimbela ukuzungezisa okutholakala kuzinguqulo ezifana ne-SA.
Izici:
- Izinhlobonhlobo zezesekeli ezitholakalayo ukuze zenziwe ngokwezifiso
- Okokufaka kufinyelela ku-3000 r/min namandla aphezulu okuthwala
- Idizayinelwe kokubili imithwalo ecindezelayo neqinile
Ngemibuzo ethile, imiklamo yangokwezifiso, noma izidingo ezikhethekile (isb., izinguqulo ezimelana nokugqwala noma izindlu ezilungisiwe), ukubonisana nethimba le-INKOMA kuyanconywa ukuze wenze uhlelo lufanele izidingo zakho.
| Usayizi (HSGK) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| Ubukhulu. ukuphakamisa umthamo ashukumisayo/emile | [kN] | 25 | 50 | 100 | 200 | 350 | ngesicelo | 1000 |
| Ubukhulu. ukulayisha okuqinile/okumile | [kN] | 25 | 50 | 100 | 178 | 350 | 1000 | |
| I-Screw Tr | 40x8 | 50x9 | 60×12 | 70×12 | 100×16 | 160×20 | ||
| Isilinganiso N | 6:1 | 7:1 | 8:1 | 8:1 | 10 2/3:1 | 13 1/3:1 | ||
| Lift per revolution yesilinganiso N | [mm/ngokwehub.] | 1.33 | 1.28 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Isilinganiso L | 24:1 | 28:1 | 32:1 | 32:1 | 32:1 | 40:1 | ||
| Phakamisa inguquko ngayinye ngesilinganiso L | [mm/ngokwehub.] | 0.33 | 0.32 | 0.375 | 0.375 | 0.5 | 0.5 | |
| Ubukhulu. umthamo wokushayela2) ku-T = 20 °C Umjikelezo Womsebenzi (ED) 20 %/h | [kW] | 1.5 | 2.3 | 3.6 | 4.8 | 7.7 | 17.9 | |
| Ubukhulu. umthamo wokushayela2) ku-T = 20 °C Umjikelezo womsebenzi (ED) 10 %/h | [kW] | 2.6 | 4 | 6.3 | 8.4 | 13.5 | 31 | |
| Isilinganiso sokusebenza ngesikulufu | [%] | 40 | 36.5 | 39.5 | 35.5 | 34 | 28.5 | |
| Isikulufa i-torque ngamandla amakhulu okuphakamisa | [Nm] | 80 | 190 | 478 | 1060 | 2600 | ngesicelo | 11115 |
| I-Max.ivunyelwe i-torque ye-drive-shaft | [Nm] | 48,7 | 168 | 398 | 705 | 975 | 4260 | |
| Umzuzu omkhulu we-inertia J Isilinganiso N uhlobo 1 | [kg cm2] | 1.247 | 3.1 | 11.97 | 30.11 | 60.76 | - | |
| Umzuzu omkhulu we-inertia J Isilinganiso N uhlobo 2 | [kg cm2] | 1.364 | 3.378 | 13.05 | 32.21 | 65.76 | - | |
| Umzuzu omkhulu we-inertia J Isilinganiso L uhlobo 1 | [kg cm2] | 0.638 | 1.804 | 8.13 | 20.91 | 44.88 | - | |
| Umzuzu omkhulu we-inertia J Isilinganiso L uhlobo 2 | [kg cm2] | 0.645 | 1.822 | 8.2 | 21.04 | 45.43 | - | |
| Impahla yezindlu | EN-GJS-500-7(GGG50) | |||||||
| Isisindo esingenabo ubude bohlangothi kanye neshubhu lokuvikela | [kg] | 13 | 25 | 47 | 74 | 145 | ngesicelo | 870 |
| Isisindo se-screw per 100 mm stroke | [kg] | 0.82 | 1.3 | 1.79 | 2.52 | 5.2 | 13.82 | |
| Inani lokuthambisa egiyeni lezikelemu | [kg] | 0.4 | 0.9 | 1.5 | 2.1 | 5 | 15.5 | |
