English

I-MA Series Ball Screw Jacks

MA Series Ball Screw Jacks Isithombe Esifakiwe
  • I-MA Series Ball Screw Jacks
  • I-MA Series Ball Screw Jacks
  • I-MA Series Ball Screw Jacks

Ulwazi Olubalulekile:

Amandla okulayisha:5 kN-350 kN njengokujwayelekile
Impahla Yezindlu:GGG / cast steel / insimbi engagqwali
Izinketho zokuhola izikulufu:1. Standard 1 x Pitch 2. 2 x Pitch 3. Anti-Rotation (Keyed) 4. Stainless Steel 5. Intambo Yesokunxele 6. Isikulufu sebhola
Imiklamo yangokwezifiso ekhethekile iyatholakala
Ishintshaniswa Ngokulinganayo Nabanye Abakhiqizi:I-SERVOMECH
Isikhathi sokuthumela:Izinsuku ezingu-7-15
Uphenyo lwakho luyidrayivu yethu!


Imininingwane Yomkhiqizo

Idatha Yezobuchwepheshe

Omaka bomkhiqizo

Ojeke be-screw ball be-MA Series banikeza ukuthuthuka okubalulekile ngaphezu kojeke bezikulufi be-acme, abalungele ukunyakaza komugqa onesivinini esikhulu, imijikelezo yomsebenzi oqhubekayo, kanye nezinhlelo zokusebenza ezifuna ukunemba okuphezulu nokusebenza kahle. Lawa ma-screw jacks anciphisa ukusetshenziswa kwamandla, ane-zero axial clearance, ahlinzeka ngokusebenza okuhlala isikhathi eside, futhi avumele ukuhlawumbisela okunembile kwesikhathi sokuphila komkhiqizo. Afanele kokubili imithwalo yokusunduza nokudonsa futhi angafakwa ngokuma mpo (phezulu/phansi) noma umumo ovundlile.

Izici:

  • Umjikelezo Womsebenzi Oqhubekayo: Uyakwazi umjikelezo wemisebenzi engu-100% ngaphandle kokushisisa ngokweqile.
  • Ukonga Amandla: Kufikela ku-50% ukonga amandla kanye nokwehliswa kwamandla afakiwe ngenxa yokusebenza kahle okuphezulu.
  • I-Zero Axial Clearance: Iqinisekisa ukunemba okuphezulu futhi isuse ukuguga kumantongomane.
  • I-Low Backlash Gearbox: I-ZI ihlanganisa i-gearbox yephrofayela, eyenzelwe ukunciphisa ukuhlehla kwe-angular.
  • I-Versatility: Ifanele ukusetshenziswa kwezimboni ezihlukahlukene njengezigayo zensimbi, ukukhiqizwa kweshidi lensimbi, ukukhiqizwa kwepulasitiki, ukudla nesiphuzo, ezokuxhumana, nokunye.
  • Izinketho Zokukhweza Eziningi: Ingakwazi ukuphatha kokubili izinhlelo zokusebenza eziya phezulu/phansi eziqondile noma ezivundlile.

Uchungechunge Lomkhiqizo:

I-MA BS Mod.A Series (Isikulufu Esihambayo)

  • Ukusebenza Kahle: Ojekhi bezikulufi zebhola abanesikulufu sokuhamba sokusebenza okuphezulu.
  • Izilinganiso ze-Gearbox: Kusuka ku-1:4 kuye ku-1:32 ukuze kudluliselwe kahle.
  • Ukuthambisa: Igiya lezikelemu eligcotshwe ngamafutha esikhathi eside.
  • Isivinini: Isivinini sokufaka esingafika ku-3000 rpm.
  • I-Ball Screw Sizes: Itholakala ngosayizi abangu-8 ngezikulufu zebhola ezisukela ku-Ø16 mm ukuya ku-Ø120 mm.
  • Umthamo Wokulayisha: Isekela imithwalo esuka ku-5 kN ukuya ku-350 kN.

I-MA BS Mod.B Series (Travelling Nut)

  • Ukusebenza Okufanayo: Izinzuzo ezifanayo njenge-Mod.A kodwa ngedizayini yamantongomane ahambayo esikhundleni sesikulufu sokuhamba.

Izinsiza:

  • Amadivayisi omkhawulo wobude be-Stroke: Atholakala ngezinzwa eziseduze kazibuthe noma ezingenisayo.
  • Ukulawula Indawo: Izifaki khodi ezikhuphukayo noma eziphelele zokuma okunembile.
  • Ukuhambelana Kwezimoto: Amamotho ajwayelekile e-IEC (AC/DC) namaseva angama-brushless asekelwa ngama-adaptha ama-flange akhethekile.
  • Ukuvikela Nokuphepha: Imihlahlandlela yethusi, amadivayisi wokumisa amantongomane, imibhobho evikelayo, namadivayisi aphikisana nokujika ukuze kuphephe okwengeziwe.
  • Izinto Ezikhethekile Nokugcoba: Izinketho zensimbi engagqwali (AISI 303, 304, 316) ziyatholakala. Izinto zokugcoba ezenzelwe izinga lokushisa eliphezulu/eliphansi kanye nokusetshenziswa kwemboni yokudla.

Lawa ma-screw Jack alungele izimboni ezifuna ukukhiqiza okuthuthukisiwe, ukusebenza kahle, nokonga izindleko kuyilapho kuqinisekisa ukusebenza okuphezulu nokuthembeka.

  • Okwedlule:
  • Olandelayo:
    • SIZE (MA)- I-Ball screw spindle I-MA5BS I-MA10BS I-MA25BS I-MA50BS I-MA100BS I-MA150BS I-MA200BS I-MA350BS
    Umthamo wokulayisha [kN] (push-pull) 5 10 25 50 100 150 200 350
    Ububanzi besikulufu sebhola [mm] 16 25 32 40 50 63 80 100
    Ibanga lesikhungo segiya lezikelemu [mm] 30 40 50 63 80 80 100 125
    Isilinganiso ngokushesha RV 1:4(4:16) 1:5(4:20) 1:6(4:24) 1:7(4:28) 1:8(4:32) 1:8(4:32) 1:8(4:32) 3:32
    evamile RN 1:16(2:32) 1:20 1:18(2:36) 1:14(2:28) 1:24 1:24 1:24 1:16(2:32)
    kancane RL 1:24 1:25 1:24 1:28 1:32 1:32 1:32 1:32
    Isikulufu sebhola I-Diameter×Lead 16x5 25×5 32 × 5 32×10 40×10 50×10 63×10 80×10 100×16
    Ibhola[mm] 3.175(1/8”) 3.175(1/8”) 3.175(1/8'') 6.35(1/4'') 6.35(1/4'') 7.144(9/32'') 7.144(9/32'') 7.144(9/32'') 9.525(3/8'')
    Ibanga lokunemba I-IT7 I-IT7 I-IT7 I-IT7 I-IT7 I-IT7 I-IT5 I-IT5 I-IT5
    Inombolo yamasekhethi 5 5 6 5 5 7 6 7 6
    Ca [kN] 12.9 16.9 22.9 44.8 52 107 117 132 189
    C0a [kN] 20.9 36.4 60 83 111 271 340 448 638
    I-Stroke[mm] yenguquko ye-shaft yokufaka engu-1 Isilinganiso RV 1.25 1 0.83 1.67 1.43 1.25 1.25 1.25 1.5
    RN 0.31 0.25 0.28 0.56 0.71 0.42 0.42 0.42 1
    RL 0.21 0.2 0.42 0.21 0.36 0.31 0.31 0.31 0.5
    Isikulufu sebhola I-Diameter×Lead 16×10 25×10 32×20 40×20 50×20 63×20 63×20 80×20 100×20
    Ibhola[mm] 3.175(1/8'') 3.969(5/32'') 6.35(1/4'') 6.35(1/4'') 7.144(9/32'') 9.525(3/8'') 9.525(3/8'') 12.7(1/2'') 12.7(1/2'')
    Ibanga lokunemba I-IT7 I-IT7 I-IT7 I-IT7 I-IT7 I-IT5 I-IT5 I-IT5 I-IT5
    Inombolo yamasekhethi 3 3 3 3 1 5 6 5 1x6
    Ca [kN] 8.6 14.2 29.8 34.3 64 122 148 228 312
    C0a [kN] 13.3 25.8 53 70 147 292 370 585 963
    I-Stroke[mm] yenguquko ye-shaft yokufaka engu-1 Isilinganiso RV 2.5 2 3.33 2.86 2.5 2.5 2.5 1.87
    RN 0.63 0.5 1.11 1.43 0.83 0.83 0.83 1.25
    RL 0.42 0.4 0.83 0.71 0.63 0.63 0.63 0.62
    Isikulufu sebhola I-Diameter×Lead 16x16 25×25 32x32 40×40 50×40 63×30 63×40 80×40
    Ibhola[mm] 3.175(1/8'') 3.175(1/8'') 6.35(1/4'') 6.35(1/4'') 7.144(9/32'') 9.525(3/8'') 9.525(3/8'') 12.7(1/2'')
    Ibanga lokunemba I-IT7 I-IT7 I-IT7 I-IT7 I-IT5 I-IT5 I-IT5 I-IT5
    Inombolo yamasekhethi 2+2 2+2 2+2 2+2 2 3 2 2
    Ca [kN] 10 13.1 35 40.3 33 81 54 103
    C0a [kN] 14.5 25.2 58 77 68 184 115 232
    I-Stroke[mm] yenguquko ye-shaft yokufaka engu-1 Isilinganiso RV 4 5 5.33 5.71 5 3.75 5 5
    RN 1 1.25 1.78 2.86 1.67 1.25 1.67 1.67
    RL 0.67 1 1.33 1.43 1.25 0.94 1.25 1.25
    Impahla yezindlu ukufakwa kwe-aluminium alloy ukuphonsa i-spheroidal graphite iron ukuphonsa i-spheroidal graphite iron
    I-EN1706-AC-AlSi10MgT6 EN-GJS-500-7(UNIEN1563) EN-GJS-500-7(UNIEN1563)
    Isisindo sikajeke wesikulufa ngaphandle kwesikulufu sebhola [kg] 2.2 4.3 13 26 48 48 75 145
    Isisindo kuwo wonke u-100 mm wesikulufu sebhola [kg] 0.14 0.35 0.57 0.91 1.44 2.26 3.7 6.16

    IMIKHIQIZO EHLOBANE